Restoring The Router To Default Settings Using The Web Interface - Belkin AC 1200 User Manual

USING YOUR ROUTER
Restoring the Router to Default
Settings Using the Web Interface
Symptoms
You need to restore the factory defaults using the web interface.
This may be because the Router is not performing as expected
or you wish to remove all previously configured settings.
Setup steps
1. Open a web browser on the computer.
3. Click on "Restore Factory Defaults" in the left-
hand column under the "Utilities" heading.
2. In the address bar of the web browser, type
"http://router" or "http://192.168.2.1".
44