Installation; Mst-431 Installation; Power Via Power Over Ethernet - AMX MST-431 Operation/Reference Manual

4.3” modero s series tabletop touch panel

Hide thumbs Also See for MST-431:

Table of Contents

Installation

Any USB peripherals (mouse, keyboard, etc.) may be connected to the USB port on the rear of the device

(FIG. 8). Updates to the device's firmware are also made via the USB port..

FIG. 8

Connectors on the rear of the MST-431

Power for the MST-431 is supplied via Power Over Ethernet (PoE), utilizing an AMX-certified, capacitive

touch-compliant PoE injector such as the PS-POE-AT High Power PoE Injector (FG423-81) or other approved

AMX PoE power source. The incoming Ethernet cable should be connected to the RJ45 port on the device

(FIG. 8).

MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels

Entry for RJ45/

USB Port

PoE Cable

Speaker

Installation

Table of Contents

Msd-431-l