Connector Locations; Memory; Basic Operation; Powering On The Mst-431 - AMX MST-431 Operation/Reference Manual

MST-431

Connector Locations

With the unit facing you, the single USB port for peripherals is located on the rear right side of the device
(FIG. 3). The RJ45 connector for PoE is also located on the back of the device.
USB Port Speaker
RJ-45 Port
FIG. 3 MST-431 USB port location

Memory

The MST-431 comes with 512 MB of SDRAM and 4 GB of Flash memory, neither of which can be upgraded.
A maximum of 2.4 GB is available to the user for projects.

Basic Operation

The MST-431 is operated using its integral touchscreen, as well as the Sleep button on the top of the device
(FIG. 1). If the device has gone into its Sleep Mode, a touch of the touchscreen or of the Sleep button will
reactivate it.

Powering on the MST-431

The MST-431 may be powered on by touching and holding the Sleep button on the top of the device.

Microphone

The MST-431 contains a built-in microphone on the top of the touch panel for video and audio conferencing
capabilities. This microphone is concealed by the casing.

Audio/Video Capabilities

The MST-431 has the capability of displaying multiple JPEG and PNG files at one time. The device also
supports motion JPEG video (of the sort used by many IP and Web cameras), as well as MP3 and WAV audio
files.
MST-431/MSD-431-L 4.3" Modero S Series® Touch Panels 5