Redialing From A Call Record - Radio Shack 43-939 Owner's Manual

43-939.fm Page 24 Tuesday, June 6, 2000 8:09 AM

REDIALING FROM A CALL RECORD

Press to dial the number from the displayed record.
CALL BACK
-DIALING- appears and the Caller ID dials the number.
Depending on your phone system's requirements, you might
need to press
FORMAT
format. Repeatedly press
mats:
• 7-digit number
• plus 7-digit number (if your system requires you to dial
1
before a 7-digit number)
• 10-digit number (area code plus 7-digit number)
• plus 10-digit number (if your local phone system requires
1
you to dial before a long-distance number)
1
Note: If you press
CALL BACK
handset, -PICK UP PHONE-
• If you pick up the handset within 5 seconds,
appears and the Caller ID dials the number.
• If you do not pick up the handset within 5 seconds, the cur-
rent Caller ID memory reappears and you must redial your
call (or press
CALL BACK
24
Caller ID Operation
before to change the dial
CALL BACK
to cycle through these for-
FORMAT
before picking up the phone's
appears.
) again.
1
–DIALING-