Connecting The Caller Id Module - Radio Shack 43-939 Owner's Manual

43-939.fm Page 13 Tuesday, June 6, 2000 8:09 AM

CONNECTING THE CALLER ID MODULE

Connect the Caller ID module to any modular phone jack and
your one- or two-line phone or digital answering machine, then
connect it to AC power.
Single-Line Phone Connection
1. Disconnect the phone line cord from the phone and plug it
into the Caller ID's
LINE
2. Plug one end of the supplied line cord into the Caller ID's
jack.
PHONE
3. Plug the other end of the cord into the phone's jack.
Two-Line Phone Connection
To record information about calls received on a two-line phone,
you can connect two Caller IDs using a 2-line, 3-way jack (not
supplied). Each Caller ID only records information about calls
received on the line to which it is connected.
1. Disconnect the phone line cord from the modular phone
jack (on the wall) and plug it into L1+L2 on the 2-line, 3-way
jack.
2. Plug the 2-line, 3-way jack into the modular phone jack.
3. Plug one end of the supplied line cord into the
one of the Caller ID modules.
4. Plug the other end of the cord into either L1 or L2 on the 2-
line, 3-way jack.
jack.
Preparation
jack on
LINE
13