Table of Contents
Advertisement
Note
The position of the brightness scale level on the upper right corner will
depend on the Swap Image option selected.
Set up Video Call Options
1.
On the Home screen, click Start > Settings > Video Call > General.
2.
In Show still image, select the image you want to display when you
turn off the camera.
•
Preset (female). Displays a female picture in place of your image.
•
Preset (male). Displays a male picture in place of your image.
•
Custom image. Lets you use an image from file as your display
picture. To choose a custom image, scroll down (Select a picture
becomes available) then use NAVIGATION right to choose an
image.
•
Last video frame. Uses the last video frame before you stopped
the camera as your display image.
3.
Select the Flip the 2nd camera video check box if you are going to
show a text document to the other party using the second camera.
4.
Select the Switch camera off when answering video call check box
to not send a video feed of yourself to the other party. Instead, the
option you selected in Show still image will be displayed.
5.
Select the Show call timer check box to display the call duration.
2.4 Receiving a Call
When you receive a phone call or video call, you have the option to answer
it or ignore it.
To answer or ignore an incoming call
•
To answer the call, press TALK (
To end a call
•
Press END (
).
Using Phone Features 47
); to ignore, press END (
).
Advertisement
Table of Contents
