HTC WING220 User Manual page 114

114 Getting Connected
Notes
To increase security on the Wi-Fi network
The LEAP (Lightweight Extensible Authentication Protocol) feature of
Comm Manager helps increase security on your phone, and ensures that
nobody is able to access your network without your permission.
1. On the WLAN Settings screen, select LEAP.
2. Click Menu > New.
3. Enter the SSID (Service Set Identifier). You can obtain this information
from your wireless service provider.
4.
Enter the user name, password, and domain.
5. Select an Authentication Type.
By default, the Authentication Type for your phone is Open System
authentication.
Notes
GPRS/3G
You can use GPRS/3G to connect to the Internet or to send and receive MMS
on your phone. When you use GPRS/3G, you will be billed per KB (Kilobyte)
when sending or receiving information.
If GPRS settings are not preset on your phone, obtain the Access point
name from your wireless service provider. Also, check with your wireless
service provider if a user name and password are required.
Note
•
Wi-Fi connects to the default network that is available on your phone.
However, GPRS starts by default if your phone does not detect any Wi-Fi
signal.
•
In Comm Manager, click Settings > WLAN Settings > Connection Status
to check the current connection status and signal quality of each Wi-Fi
channel.
• By default, the LEAP screen displays data that you entered previously.
However, you can modify or delete the data as required by clicking Menu
> Modify or Menu > Delete on the LEAP screen.
• For LEAP to work correctly, the receiving phone (your phone) must be set
with the same SSID, user name, and password as the access point.
Check with your service provider how much it charges for its GPRS service.