Using Remote Desktop Mobile - HTC Snap User Manual

Using Remote Desktop Mobile

Remote Desktop Mobile lets you access your computer remotely from your device and use programs which
are available on your computer.
Notes • Make sure that you configure the remote computer to allow remote desktop connections. Refer to your
operating system's manual or help file for details.
• You need to be connected to the Internet to remotely access your desktop computer.
To configure the remote desktop display:
Before you connect to your remote computer, configure the Remote Desktop Mobile to optimize the remote
computer display on your device.
1. Press Start (left softkey) > All Programs (left softkey) > Remote Desktop .
2. Press Menu (right softkey) > Options .
3. Do any of the following:
In Display , select 256 Colors .
Select the Full screen check box to display the remote desktop in full-screen mode.
When using programs which are specifically configured for use with your device, select the Fit remote
check box to adjust the desktop proportions to fit your device's screen.
desktop to screen
In Device storage , select whether to map device storage to the remote machine or disable mapping.
In Remote desktop sound , select Mute to mute audio, select Play on remote computer to play audio on the
remote computer, or select Play on this device to play audio on your device.
4. Press Done (left softkey).
To connect to a remote computer:
1. On the Remote Desktop Mobile screen, enter the computer name (or IP address), user name, password,
and domain of the remote computer, and then select the Save password option.
Note If the computer is set up on a custom port, include the custom port number with the computer name
(computername:portnumber). You can get this information from your system administrator.
2. Press Connect (left softkey). When connected, you can now access and start using the desktop computer
programs on your device.
To disconnect from the remote computer:
Press Disconnect (left softkey).
– or –
When in full-screen mode, press Start (left softkey) > Exit full screen mode > Disconnect (left softkey) on the
Windows desktop (on the device).
3B. Web and Data Services 109