1.4 Using the Strap Holder
The strap holder at the bottom panel of your device allows you to attach a wrist
strap, neck lanyard, or string accessory.
To attach a strap, lanyard or string accessory to the strap holder
1.
Remove the back cover.
2.
Insert the loop of the strap, lanyard
or string accessory through the
strap holder hole on the back cover.
Tip
To pass through the strap holder
hole easier, push the loop into the
strap holder hole using a pointed
object such as a needle or a
toothpick.
3.
Attach the loop over the small
T-shaped hook at the bottom of the
device back panel.
4.
Slightly pull the strap, lanyard or
string accessory from the back cover
to secure it in place.
5.
Replace the back cover.
Getting Started 5