HTC FUZE User Manual page 203

• Metering Mode. Select a metering mode to allow the camera to measure the
amount of light and calculate the best-fit exposure value before capturing.
Choose either Center Area to measure light using the center area of the
subject, or Average to measure light using the area around the subject.
• Prefix. When Default is selected as the prefix, the file name of each new
captured file is set to "IMAGE" or "VIDEO" followed by a sequential number, for
example: IMAGE_001.jpg. You may also choose to name files using either the
current Date or Date & Time as the prefix.
Note If you set the Camera to save captured photos to a storage card, the prefix
cannot be selected. Captured photos will be named using the convention
IMAGnnnn.jpg (where 'nnnn' is the counter) which is the DCIM (Digital Camera
Images) naming standard, and will be saved to the \DCIM\100MEDIA folder on
the storage card.
• Counter. To reset the file naming counter back to 1, tap Reset.
• Flicker Adjustment. When taking indoor shots, flicker on the camera screen
may be caused by inconsistencies between the vertical scan rate of the
camera display and the flicker frequency of fluorescent lighting. To reduce
flicker, you can change the flicker adjustment setting to Auto or to the proper
frequency (50Hz or 60Hz) of the power in the country where your device is
being used.
• Grid (Photo mode). Choose whether or
not to show a grid on the Camera screen.
Showing a grid helps you frame and
center your subject easily and accurately.
• Record with Audio (Video and MMS
Video mode). Select On to record audio
with the captured video clips, or select Off
to capture video without audio.
• Template (Picture Theme mode). Select a
template.
Experiencing Multimedia 0
Grid marks