LG WM1333HW Training Manual page 31

5) Unscrew all the screws from upper and lower
part of the cabinet cover.
6) Disassemble the clamp assembly.
7) When reassembling the gasket, put the drain
hole of the gasket downward.
MOTOR/DAMPER
1) Disassemble the back cover.
2) Remove the bolt.
3) Pull out the Rotor.
4) Unscrew the 2 screws from the tub bracket.
5) Remove the 6 bolts on the stator.
6) Unplug the 2 connectors from the stator.
7) Disassemble the damper hinges from the tub
and base.
8) Separate the dampers.
NOTE: Once removed, replace the damper with
new one.
Series 33 Washer Training
31
DISASSEMBLY
Disassembly