LG WM1333HW Training Manual page 30

DISASSEMBLY
4) Disassemble the clamps and hoses.
5) Disassemble the bellows at the lower side of
the dispenser.
INLET VALVE
1) Disassemble the 4 connectors from the valves.
2) Unscrew the 2 screws from the back of the
cabinet.
Valve 1 Main Wash
Valve 2 Bleach
Valve 3 Hot
DOOR
1) Open the door.
2) Unscrew the 2 screws from the Cabinet Cover.
3) Disassemble the door upward.
Caution: When removing the Door Assembly, hold
the bracket inside of the cabinet cover.
WATER REMOVAL
1) Drain remaining water into a bucket by pulling
out hose and removing cap.
DOOR GASKET
1) Disassemble the clamp assembly.
2) Unscrew the 2 screws from cabinet cover.
3) Open the filter cover and unscrew 1 screw.
4) Remove the lower cover.
Series 33 Washer Training
Wire color
WH - BK
GY - BK
BL - BK
CAP (REMAINING HOSE)
30
DISPENSER ASSEMBLY
3
2
1
Disassembly