LG WM1333HW Training Manual page 20

TROUBLESHOOTING
MALFUNCTIONING DRAIN
(1)
(2)
PWB ASSEMBLY (MAIN)
TOO HOT
Series 33 Washer Training
Is the drain hose twisted or frozen?
Is the impeller of the drain pump clogged?
Is the connector disconnected or disassembled.
Is the resistance of the drain pump coil too high or
low? (resistance of the coil is 10-20 Ω)
When checking voltage between connectors
during spin, is the voltage 120 V AC as in the
figure?
Delay Wash and Quick Cycle
Extra Hot: 66°C
Hot: 45°C
Warm: 30°C
Cold: 15°C
When checking THERMISTOR on the tub, is the
THERMISTOR loosened?
20
Repair the DRAIN HOSE
ASSEMBLY.
Remove foreign material.
Reconnect or repair the
connector
Repair the DRAIN PUMP
ASSEMBLY.
Repair the MAIN PWB
ASSEMBLY.
MAIN PWB ASSEMBLY.
Check electrical connection.
Replace THERMISTOR.
Push the THERMISTOR
tightly to the rubber.
Troubleshooting