System Menu; Loudness; Auxiliary Input; Liquid Crystal Display (Lcd) - Jensen HD1BT Installation And Operation Manual

Loudness

Press the AUDIO/MENU button (12) to enter LOUDNESS selection. Then press the VOL +/-
buttons to toggle loudness on/off. When listening to music at low volumes, this feature will boost
the bass and treble ranges to compensate for the characteristics of human hearing.

System Menu

1. Press and hold the AUDIO/MENU button (12) for more than 2 seconds to enter the system
menu. The first menu item, "Key Beep", will appear on the display.
2. Press the |<< / >>| (18, 16) button repeatedly to navigate the system menu.
3. Press the ENTER button (17) to select the desired item.
4. Press the ENTER button again to adjust the selected menu item.
The following items can be adjusted:

Key Beep (On / Off): Turn the audible beep On/Off (heard when functions/buttons are
selected). Default : OFF.

LCD Backlight (1-10): Adjust LCD brightness.

LCD Contrast (1-10): Adjust LCD contrast.

Tuning Region (USA / EURO): Set frequency spacing for various regions.

Power-Off Clock (Off, 1-10): Brightness setting of clock when powered off

Clock Format (12Hour / 24Hour): Select 12 or 24 hour display mode.

Set Clock (HH : MM):

Press the ENTER button (17) to view the clock set screen.

Press the ENTER button to move to the next digit.

Press the |<< / >>| (18, 16) buttons to adjust the selected digit.

Rear AUX Enable (On/Off): Turn on to allow the use of auxiliary audio input at the rear of
the radio chassis. Default: OFF.

Preset-Only Tuning (On / Off). Default: OFF.

SiriusXM Settings Menu (only appears when SiriusXM tuner is connected and in SiriusXM
mode)

Clock Autoset (On/Off): Sets clock based on SXM data. Default: OFF.

Time Zone1 (Atlantic / Eastern / Central / Mountain / Pacific / Alaska)

Daylight Saving Time (Yes/No)

Set Lock Code: _ _ _ _

Locked Channels: List of Channels (Locked / Unlocked)

SXi Firmware Version

Weather Alert Configuration

Min Alert Level (All / None / Warnings / Watches)

Auto-On Enable (Yes/No): Select "Enabled" to turn on the radio when NOAA alerts
are issued. This function only works when the +12V switched is on.

Alert Volume (Select Volume Level 0-40)

Clear SAME Codes <ENTER>

SAME Code 1: _ _ _ _ _ _

SAME Code 2: _ _ _ _ _ _

SAME Code 3: _ _ _ _ _ _

SAME Code 4: _ _ _ _ _ _

SAME Code 5: _ _ _ _ _ _

SAME Code 6: _ _ _ _ _ _

SAME Code 7: _ _ _ _ _ _

Battery Alarm (On/Off). Default: OFF.

Battery Auto-Off (On/Off). Default: OFF.

Bluetooth Setup

BT: On/Off

BT Device List <Enter>: View a list of devices paired with the unit

BT Pair <Enter to enable>

Reset System Defaults <ENTER>: Press the ENTER button (17) to return the EEPROM to
factory default set up values.

Auxiliary Input

To access an auxiliary device:
1. Connect the portable audio player to the AUX IN at the rear of the unit.
Press the MODE button (3) to select "Auxiliary" mode.
2.
Press MODE again to cancel "Auxiliary" mode and go to the next mode.
3.

Liquid Crystal Display (LCD)

The current frequency and activated functions are shown on the LCD panel (19).
NOTE: LCD panels may take longer to respond when subjected to cold temperatures for
an extended period of time. In addition, the visibility of the characters on the LCD may
decrease slightly. The LCD display will return to normal when the temperature increases
to a normal range.

Setting the Clock

To set the clock to display the current time, turn the vehicle ignition on and turn the radio on.
Enter the system menu and adjust the clock by selecting the "Set Clock" menu item.

Press the ENTER button (17) to view the clock set screen.

Press the ENTER button to move to the next digit.

Press the |<< / >>| (18, 16) buttons to adjust the selected digit.
When no adjustment is made for five seconds, the time will become set and normal operation
will resume.
Scroll
When the information is too long to be displayed on the LCD, press the VIEW button (13) to view
the entire title. The information will scroll twice and then return to abbreviated text.
6
HD1BT