Video Driver Installation For Ibm Os/2 - Asus P2B-N User Manual

B. Other Video Drivers

Video Driver Installation for IBM OS/2

The ATI OS/2 video driver is to be used for the English version of OS/2 only.
To install ATI video drivers for OS/2 or OS/2 Warp, use the INSTALL program.
This program checks the system for possible conflicts, sets the monitor type, and
installs the enhanced display driver.
To run the INSTALL program
1. Start OS/2.
2. Check that OS/2 is using a standard VGA driver and no other applications are
running.
3. Double-click the OS/2 System folder.
4. Double-click the Command Prompts folder.
5. Double-click the OS/2 Full Screen object.
6. Insert the ASUS Support CD.
7. Type D: <Enter> (assuming D is your CD-ROM driver).
8. Type CD ATI\UTILITY <Enter>. Type OS2INST <Enter>
9. Select Utilities Installation from the Main Menu.
This copies the utiities onto your hard drive.
10. Press <Enter> to select the default destination directory.
11. When prompted, let the INSTALL program make changes to your Autoexec.bat
file.
12. Select QUICK SETUP.
You need to select QUICK SETUP to specify a monitor. Proper monitor
selection is necessary for correct resolution and refresh rate operation.
13. Select your monitor from the list.
or
If you do not see your monitor listed, see Custom Monitor Configuration..
After you have selected a monitor, you are ready to cop y the enhanced driver files.
76 ASUS P2B-N User's Manual