Central Processing Unit (Cpu); Universal Retention Mechanism; Heatsinks - Asus P2B-N User Manual

III. INSTALLATION

3. Central Processing Unit (CPU)

Your motherboard provides a Slot 1 connector for a Pentium
in a Single Edge Contact Cartridge (SECC/SECC2) or a Celeron™ processor pack-
aged in a Single Edge Processor Package (SEPP).
Pentium II processor packaged in an SECC with heatsink and
fan (top view)

Universal Retention Mechanism

Your motherboard comes preinstalled with a Universal Retention Mechanism (URM).
The URM supports Pentium II and Celeron processors.

Heatsinks

The recommended heatsinks (see section on recommended heatsinks for Pentium II
processors for more information) for the boxed Pentium II and Celeron processors
are those with three-pin fans that can be connected to the fan connectors on the
motherboard.
WARNING!
Be sure that there is sufficient air circulation across the processor's
heatsink by regularly checking that your CPU fan is working. Without sufficient
circulation, the processor could overheat and damage both the processor and the
motherboard. You may install an auxiliary fan, if necessary.
Pentium II processor packaged in an SECC2 or Celeron™ processor
packaged in an SEPP with heatsink and fan (top view)
Universal Retention Mechanism (URM)
ASUS P2B-N User's Manual
®
II processor packaged
21