Asus P2B-N User Manual page 29

III. INSTALLATION
4. Parallel Connector (25-pin PRINTER)
You can enable the parallel port and choose the IRQ through "Onboard Parallel
Port" in Chipset Features Setup of the BIOS SOFTWARE. NOTE: Serial printers
must be connected to the serial port.
5. Serial Port Connectors (Two 9-pin COM1 AND COM2)
The two serial ports can be used for pointing devices or other serial devices. See
"Onboard Serial Port" in Chipset Features Setup of the BIOS SOFTWARE.
6. Monitor Connector (15-pin VGA)
This connector is for displaying on a standard VGA-compatible device.
VGA Monitor (15-pin female)
7. LAN Diagnostic LEDs (LAN_LED)
These diagnostic LEDs help indicate if there is a problem with the network
connector, cable, or hub.
1 Speed
2 Activity
3 Link
1 Green
2 Yellow
3
Green
LED on
10Mbps
No data
Bad connection
ASUS P2B-N User's Manual
Parallel Port (25-pin female)
COM 1
Serial Ports (9-pin male)
LED off
100Mbps
Data transfer
Good connection
COM 2
29