Asus P2B-N User Manual page 13

III. INSTALLATION
Jumpers
1) CLR_RTC
2) VIO
3) LANDIS_EN
4) AUDIS_EN
5) KB_WAKE
6) FS0, FS1, FS2
7) BF0, BF1, BF2, BF3 p. 17 CPU Core:BUS Frequency Multiple
Expansion Slots
1) DIMM Sockets
2) CPU Slot 1
3) SLOT 1 (ISA)*
4) PCI1, 2
Hardware Monitor
1) CPU THEM
Connectors
1) PS2KBMS
2) PS2KBMS
3) GAME
4) PRINTER
5) COM1, COM2
6) VGA
7) LAN_LED
8) USB
9) IR
10) NLX_PWR
11) IDE1
12) FLOPPY
13) LAN_LED, WOL_CON p. 31 LAN Activity Connectors (2-pin & 3-pin)
14) PAN-CON
15) MIC-CON
16) AMC
17) JACK_CON
18) CPU_, CHASIS_FAN p. 34 CPU Fan Power (Two 3-pin blocks)
19) CDROM
*
The onboard hardware monitor uses the address 290H-297H so legacy ISA cards
must not use this address or else conflicts will occur.
P. 14 Real Time Clock (RTC) RAM
p. 15 Voltage Input/Output Selection
p. 15 LAN Setting (Enable/Disable)
p. 15 Audio Setting (Enable/Disable)
p. 16 Keyboard Wake Up (Enable/Disable)
p. 16 CPU External Clock (BUS) Frequency Selection
p. 19 168-pin DIMM Memory Expansion Sockets
®
p. 21 Pentium II/Celeron™ CPU Support
p. 26 16-bit ISA Bus Expansion Slots*
p. 26 32-bit PCI Bus Expansion Slots
p. 25 Pentium II/Celeron Processor Thermal Sensor Connector
p. 28 PS/2 Mouse Connector (6-pin female)
p. 28 PS/2 Keyboard Connector (6-pin female)
p. 28 Joystick or MIDI Connector (15-pin female)
p. 29 Parallel Port Connector (25-pin female)
p. 29 Serial Port COM1 and COM2 (Two 9-pin male)
p. 29 VGA Compatible Connector (15-pin female)
p. 29 LAN Diagnostic LEDs
p. 30 Universal Serial BUS Ports 1 & 2 (Two 4-pin female)
p. 30 Infrared Module
p. 30 NLX Motherboard Power Connector (20-pin block)
p. 31 Primary IDE Connector (40-pin block)
p. 31 Floppy Drive Connector (34-pin block)
p. 32 Front Panel Display LEDs and Switches (16-1 pin)
p. 32 Front Panel Microphone Jack Connector (2-pin)
p. 34 ATI Multimedia Connector (40-3 pin block)
p. 34 Back Panel Audio Connectors (10-1 pin block)
p. 35 CD-ROM Drive Connector (50-3 pins)
ASUS P2B-N User's Manual 13