Brother MFC-9330CDW Owner's Manual page 26

For Wireless Network Users
k
Confirm the wireless network settings, and
then click Next. The settings will be sent to your
machine.
NOTE
• The settings will remain unchanged if you click
Cancel.
• To manually enter the IP address settings of
your machine, click Change IP Address and
enter the necessary IP address settings for your
network.
• If the wireless setup failure screen appears,
click Retry.
l
Disconnect the USB cable between the
computer and the machine, and then click
Next.
Wireless setup is now complete.
A four-level indicator at the top right of
your machine's Touchscreen will show
the wireless signal strength of your
wireless access point/router.
To install the MFL-Pro Suite, continue to
step 18.
®
For Windows Users:
Now go to
step 18-e on page 35
For Macintosh Users:
Now go to
step 18-d on page 37
26