Power Supply Specifications; Environmental Requirements - HP Surestore fc 1Gb/2Gb switch 16B Installation And Reference Manual

Power Supply Specifications

The power supplies are universal and capable of functioning worldwide without using voltage
jumpers or switches. They meet IEC 61000-4-5 surge voltage requirements and are autoranging in
terms of accommodating input voltages and line frequencies. Each power supply has its own built-
in fan for cooling, pushing the air towards the front of the switch.
.
Table A-2
Specification
Outlet
Total power available
from each power supply
Max. switch power
Input voltage
Input line frequency
Harmonic distortion
BTU rating
Inrush current
Input line protection
Maximum dimensions

Environmental Requirements

The following table lists the environmental ranges that are acceptable when the FC 16B is
operating, and the ranges that are acceptable when the switch is not operating.
Table A-3
Condition
Temperature (operating)
Temperature (non-operating)
Humidity (operating)
Humidity (non-operating)
Altitude
Altitude
HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference Guide
Power Supply Specifications
Value
Correctly wired and earth-grounded
126 Watts, with fans operating
90 - 102 Watts (depending on SFP media vendor)
100 - 240 VAC
47 - 63 Hz
Active power factor correction per IEC1000-3-2
108 Watts x 3.412 BTU/Hr/Watts = 368.5 BTU/hr
10 Amps Peak, > 300 usec - hot/cold start
Fused in both hot & neutral lines
3.5" wide, 1.5" high, 13.5" long
Environmental Requirements
Acceptable Range
C to 40 C
10
C to 65 C
-35
5% to 85% RH non condensing, at 40 C
0% to 90% RH non-conducting, at 4 °C
0 to 3 kilometers above sea level
(operating)
0 to 12 kilometers above sea level
(non-operating)
A
Product Specifications
A-3