Leds On The Power Supply Side - HP Surestore fc 1Gb/2Gb switch 16B Installation And Reference Manual

3
Operating the HP Surestore FC 1Gb/2Gb Switch 16B
Table 3-1
Location
of LED
Below
Serial
Port

LEDs On the Power Supply Side

Figure 3-2 shows the power supply side of the switch with the LEDs identified.
Figure 3-2
3-4
SFP Media Side LED Patterns During Normal Operation
Purpose Color of LED
of LED
Steady green
Indicates No light
switch
power
Steady green
Slow-flashing
green
Power Supply LED (2x)
AC Power Switch (2x)
Power Supply #2
Fan Tray Assembly
(containing
The power supply side of the FC 16B
HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference
Status of Hardware
The port is transmitting/
receiving at 2 Gbps.
Either the switch is off, or
boot is not complete, or
boot has failed.
Switch is on and boot has
successfully completed.
Diagnostic failure on one or
more ports.
Switch Status LED
Fan Tray Assembly (containing
Spring Latch (2x)
fans #3 and 4)
Recommended
Action
No action required.
Verify that the switch
is on and boot has had
time to complete. If
there is still no light,
contact your HP
account representative.
No action required.
Errors may be listed in
the error log. Refer to
the Fabric OS
Procedures Guide for
more information.
Power Supply #1
fans #1 and 2)