Switch Components - HP Surestore fc 1Gb/2Gb switch 16B Installation And Reference Manual

Product Specifications
This appendix provides the following information:
•
Switch Components on page A-1
•
Weight and Physical Dimensions on page A-2
•
Facility Requirements on page A-2
•
Power Supply Specifications on page A-3
•
Environmental Requirements on page A-3
•
General Specifications on page A-4
•
Memory Specifications on page A-5
•
Optical Port Specifications on page A-5
•
Serial Port Specifications on page A-5
•
POST Specifications on page A-6
•
Regulatory Compliance on page A-7

Switch Components

The FC 16B switch consists of the following components:
•
A 1U chassis, designed to be mounted in a 19-inch rack, with forced-air cooling that flows
from the power supply side of the switch to the SFP media side.
•
16 optical ports, compatible with SFPs (small form factor pluggable media).
•
One RS-232 serial port (DB9 connector) on the SFP media side.
•
One IEEE compliant RJ-45 connector on the SFP media side for use with 10/100 Mbps
Ethernet or in-band.
•
Human-readable labels and bar code labels on the front and back.
•
A total of 36 LEDs
•
•
•
•
•
Two universal input and redundant power supplies with AC switches and built-in fans. The
power supplies plug into internal blind-mate connectors when installed in the chassis.
HP Surestore FC 1Gb/2Gb Switch 16B Installation and Reference Guide
Two LEDs for each of the 16 ports to indicate port status and link speed information.
One LED on each power supply to indicate the status of that power supply.
One LED on the left of the SFP media side to indicate whether the switch has power.
One LED in the center of the power supply side to indicate the overall switch status.
Appendix
A
A-1