Sonos Digital Music System User Manual page 27

Chapter 2: ZonePlayer Setup and Operation
3. If you are adding a ZP100, attach speakers to your ZonePlayer (see "Step 1: Set Up
Speakers/Apply Power" on 2-2) . If you are adding a ZP80, connect to an external
amplified device (see "Using Line-out" on 2-13).
After you plug the ZonePlayer into a wall outlet, the Mute indicator and the
ZonePlayer Status indicator will begin to flash. (If this ZonePlayer was previously
connected to another Sonos Digital Music System, the ZonePlayer Status indicator may
light solid white instead.)
Mute; flashes green
Status Indicator; flashes white
4. Choose one of the following options:
• Use the Desktop Controller to add the ZonePlayer to your Sonos Digital Music
System by selecting Zones>Set Up Zones>Add.
Or,
• Use a Sonos Controller to add the ZonePlayer to your Sonos Digital Music System
by selecting System Settings
During the setup process, you will be asked to press and release the Mute and Volume
Up buttons simultaneously on the ZonePlayer you are adding to the Sonos Digital
Music System.
• You may release the buttons as soon as the Mute indicator (green) and the
ZonePlayer Status Indicator (white) start to blink alternately (this takes ap-
proximately 1 second.)
• When the ZonePlayer has been successfully added to your music system, the
Mute indicator will go out and the ZonePlayer Status indicator will change to
solid white.
>
Add a ZonePlayer from the Music menu.
2-9