Restore Factory Defaults; Reset Appliance; Enable Ldap Debug Messages; Set Web Interface Ports - HP 409054-003 User Manual

Restore Factory Defaults

The Restore Factory Defaults option enables you to delete all settings and restore all parameters in the
configuration to factory defaults.

Reset Appliance

The Reset Appliance option reboots the server console switch.

Enable LDAP Debug Messages

The Enable LDAP Debug option enables you to disable LDAP debug messages.

Set Web Interface Ports

By default, the web server runs on port 443. The Set Web Interface Ports option enables you to modify
the web server default port setting.
Console switch serial management 71