Click OK to save settings, or click Clear to remove all servers from the scan list.
3.
Removing servers from the scan list
From the Scan dialog box
1.
double-click a server name or port, or click Clear to remove all servers from the scan list.
Click OK to save settings.
2.
Activating Scan mode
From the Commands dialog box
1.
Enable.
Click X to close the Commands dialog box. The scan begins as soon as you click the Scan button in
2.
the Setup dialog box
Deactivating Scan mode
If the OSD is open, select a server.
-or-
("Setting up a scan
("Managing server tasks using the
("Managing routine tasks for
pattern" on page 44), click the server to be removed,
OSD" on page 48), select Scan
servers" on page 31).
Local port operation 46