Redundant Hot-Plug Power Supply Option; Hard Drive Options; Hard Drive Guidelines - HP PROLIANT DL320 G6 User Manual

Redundant hot-plug power supply option

To install the component:
Remove the power supply blank.
1.
Install the power supply.
2.
Connect the power cord to the power supply.
3.
Connect the power cord to the AC power source.
4.

Hard drive options

The server provides non-hot-plug capability through an embedded SATA controller. To obtain hot-plug
capability, install an optional controller and hot-plug cable option kit.

Hard drive guidelines

When adding hard drives to the server, observe the following general guidelines:
•
The system automatically sets all drive numbers.
•
If only one hard drive is used, install it in the bay with the lowest drive number.
Hardware options installation 32