Installation Of Modesty Panel; Installation/Removal Of Optional Bezel; Installation Of Optional Surround - Lennox Hearth Products Rhapsody RHAP42N Installation Instructions Manual

LENNOX HEARTH PRODUCTS • RHAPSODY™ LINEAR DIRECT-VENT GAS FIREPLACES (MODELS RHAP42N & RHAP54N) • INSTALLATION INSTRUCTIONS
INSTALLINg fIREPLACE COMPONENTS
(CONTINUEd)
INSTALL MOdESTy PANEL
NOTE: Modesty panel will not be used if surround and bezel will be installed.
To install the modesty panel, insert the four hooks on modesty panel into the four slots on door
flange, then slide panel to the LEFT until fully seated (see Figure 50).
Modesty Panel
Figure 50
Slot on door
Hook on
flange
Modesty Panel
Insert hooks into slots
(4 places), then slide
panel left until seated
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Installation of Optional Bezel
1. Hook the bezel upper flange to the top
edge of the glass door frame, and then
swing the lower edge of the bezel toward
the door (Figure 51).
2. Gently push the lower edge of the bezel to
attach the bezel lower flange to the lower
edge of the glass door frame.
Reverse these steps to remove the bezel.
Bezel Lower
flange
[CROSS-SECTION]
Figure 51
INSTALLATION Of OPTIONAL
SURROUNd
Surround installs after wall finish is complete.
See Pages 32 and 33.
Bezel Upper
flange
glass door
frame
29