Volvo XC 70 Owner's Manual page 66

02 Locks and alarm
Remote key and key blade
Detachable key blade
The key blade can be removed from the
02
remote key. When removed, the key blade
can be used to:
•
Lock/unlock the driver's door if the
remote key is not functioning properly
•
Lock/unlock the glove compartment (see
page 72)
•
Override the transmission's shiftlock sys-
tem (see page 130)
•
Enable/disable the private locking func-
tion (see page 67)
Removing the key blade
Slide the spring loaded catch to the side.
Pull the key blade straight out of the
remote key.
*
64
Option/accessory, for more information, see Introduction.
Reinserting the key blade in the remote
key
1. Hold the remote key with the slot for the
key blade up.
2. Carefully slide the key blade into its
groove.
3. Gently press the key blade in the groove
until it clicks into place.
Unlocking the driver's door with the
detached key blade
Driver's door keyhole cover
If the remote key/PCC* does not function nor-
mally (weak battery, etc.), the vehicle can be
unlocked with the detachable key blade.
1. Remove the key blade from the remote
key/PCC (see the previous section,
"Removing the key blade" on page 64 for
instructions).
2. Press the key blade approx. 0.5 in. (1 cm)
straight up in the hole on the underside of
the keyhole cover.
> The cover will come off due to the
pressure exerted when the key blade is
pushed upward.
3. Insert the key blade as far as possible in
the driver's door lock. Turn the key blade
to unlock the driver's door. This will trig-
ger the alarm.
4. To turn off the alarm, insert the remote
key in the ignition slot. This also applies
to vehicles equipped with the optional
keyless drive.
5. Press the cover back into place after the
door has been unlocked.