Cargo Area - Volvo XC 70 Owner's Manual

Steel cargo grid*
Your vehicle can be equipped with a steel
grid that helps prevent objects in the cargo
area from moving forward into the passenger
compartment.
Folding the grid up/down
Grasp the lowering edge of the grid and pull it
rearward/upward, or push it downward/
forward.
NOTE
If the steel grid is to be used with the
optional cargo area cover, the grid must
be folded down before the cargo area
cover is put in place.
Installing the steel cargo grid
In order to install the steel grid, the rear seat
backrests must be completely folded down,
see page 95 for instructions.
NOTE
•
The steel cargo grid is easiest to install
by two people, and should be folded
down.
•
When installing the grid, the handle
should be on the front side of the grid
(see illustrations – ).
Put the handle in the installation position,
see the illustration. Press lightly on the
handle in order to turn it to this position,
see the arrow.
Press in the piston toward the grid and
press it into the attachment bracket near
the ceiling.
Turn the handle 90° . Press lightly as
shown in illustration if necessary.
Attach the grid by moving the handle
90°.
Do the same on the opposite side of the
vehicle.
07 During your trip
Installing the cargo grid
*
Option/accessory, for more information, see Introduction.

Cargo area

07
}}
299