IBM eServer BladeCenter JS20 Installation And User Manual page 86

Checkpoint code Description
E175 Boot Internet protocol (BOOTP)
request.
E176 Trivial file transfer protocol (TFTP) file
transfer.
E177 Transfer failure due to a TFTP error
condition.
E17B Microprocessor clock-speed
measurement.
E191 Create an industry standard
architecture (ISA) reserved node.
E19A NVRAM auto-boot? variable not
found - assume FALSE.
E19B NVRAM menu? variable not found -
assume FALSE.
70
BladeCenter JS20 Type 8842: Installation and User's Guide
Suggested action
1. Make sure that the BOOTP server is correctly
configured for this client. Correct any problems
found; then, retry the operation.
2. Make sure that network connections are correct,
then retry operation.
3. Perform the system checkout procedure. See
"System checkout" on page 64.
4. If there are no problems with the BOOTP server or
the network connection, replace the system board.
Contact a service support representative for
assistance.
1. Make sure that the blade server is correctly
configured; then, retry the operation.
2. Make sure that the network connections are correct;
then, retry the operation.
3. If there are no problems with the BOOTP server or
the network connection, replace the system board.
Contact a service support representative for
assistance.
1. Make sure that the BOOTP server is correctly
configured; then, retry the operation.
2. Make sure that the network connections are correct;
then, retry the operation.
3. Perform the system checkout procedure. See
"System checkout" on page 64.
4. If there are no problems with the BOOTP server or
the network connection, replace the system board.
Contact a service support representative for
assistance.
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. If the problem remains, you might have a problem
with the system board. Contact a service support
representative for assistance.
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.
1. Perform the system checkout procedure. See
"System checkout" on page 64.
2. This error indicates that you might have a problem
with the system board. Contact a service support
representative for more information.