Dial Prefix; Setting Up The Prefix Number; Changing The Prefix Number - Brother MFC-9140CDN Advanced User's Manual

Chapter 1

Dial Prefix

The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside
number, use this setting to automatically dial
9 for every fax you send.

Setting up the prefix number

a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Initial Setup.
d
Press Initial Setup.
e
Swipe up or down, or press a or b to
display Dial Prefix.
f
Press Dial Prefix.
g
Press On.
h
Press Dial Prefix.
i
Enter the prefix number (up to 5 digits)
using the keyboard on the Touchscreen.
Press OK.
NOTE
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• If your telephone system requires a time
break recall (hookflash), press ! on the
Touchscreen.
• If pulse dialing mode is on, # and l are not
available to use.
j
Press .
4

Changing the prefix number

1
a
Press
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Initial Setup.
d
Press Initial Setup.
1
e
Swipe up or down, or press a or b to
display Dial Prefix.
f
Press Dial Prefix.
g
Press On (or Off).
You can turn off the prefix number by
pressing Off. The prefix number will
remain off until you press On.
h
Press Dial Prefix.
i
Do one of the following using the
keyboard on the Touchscreen.

To change the prefix number, press
d or c to position the cursor under the
digit to be deleted and press the
Back Space button
the correct digit.
Repeat until the prefix number is
correct, and then press OK.

To exit without making a change,
press OK.
NOTE
• You can use the numbers and symbols 0
to 9, #, and l. (You cannot use ! with any
other numbers or symbols.)
• If your telephone system requires a time
break recall (hookflash), press ! on the
Touchscreen.
• If pulse dialing mode is on, # and l are not
available to use.
j
Press .
.
. Then press
1