Date & Time - Axis 231D User Manual

AXIS 231D/232D - System Options
26
2. Click OK.
3. Create self-signed certificate generates and installs a certificate which will be
displayed under Installed Certificate.
Create Certificate Request generates a PEM formatted request which you copy and
send to a CA for signing. When the signed certificate is returned, click Install signed
certificate... to install the certificate in the AXIS 231D/232D.
4. Set the HTTPS Connection Policy for the administrator, Operator and Viewer to
enable HTTPS connection (set to HTTP by default)
Please refer to the home page of your preferred CA for information on where to send the
request etc. For more information, please refer to the online help files
Date & Time
Current Server Time - displays the current date and time (24h clock). If this has not
been configured, the time displayed is the default setting. The time can be displayed in
12h clock format in the Overlay Images (see below).
New Server Time - Select your time zone from the drop-down list and check the day-
light saving time changes, if desired.
From the Time Mode section, select the preferred method to use for setting the time:
• Synchronize with computer time - sets the time from the clock on your
computer.
• Synchronize with NTP Server - the Network Dome Camera will obtain the
time from an NTP server every 60 minutes. Specify the NTP server's IP
address or host name. Note that if using a host name for the NTP server, a
DNS server must be configured under TCP/IP settings. See Network | TCP/IP
below.
• Set manually - this option allows you to manually set the time and date.
Date & Time Format Used in Images - specify the formats for the date and time (12h
or 24h) displayed in the Live View video streams.
Use the predefined formats or use your own custom date and time formats. See
Advanced File Naming & Date/Time Formats in the help files
how to create your own file formats.
for information on