Basic Configuration - Axis 231D User Manual

AXIS 231D/232D - Configuring the Network Dome Camera
10

Basic Configuration

Note:
The links under Basic Configuration are shortcuts to the necessary basic settings the first time the unit is
configured.
Tools
Instructions
Users
TCP/IP
Date & Time
Video & Image
Video & Image (Administrator/Operator)
Tools
Image
Overlay Image
Advanced
Live View Config (Administrator/Operator)
Tools
Layout
HTML Examples
Dome Configuration (Administrator/Operator)
Tools
Preset Positions
Sequence Mode
Limits
Advanced
Event Configuration (Administrator/Operator)
Tools
Instructions
Event Servers
Event Types
Port Status
Settings / Options / Description
General Instructions
See System Options | Security | Users below
See System Options | Network | TCP/IP below
See System Options | Date & Time below
See Video & Image | Image below
Settings / Options / Description
Image Settings Basic image settings; Resolution, compression, color settings, rotate image.
Overlay settings places an overlay (e.g. a logotype) in the video image.
Video stream - setting to limit the video stream display time
An overlay image is, e.g. a company logo added to the video image
Camera Settings for white balance, exposure control, shutter speed and backlight compensation.
Settings for the IR Cut Filter (AXIS 232D only).
Settings / Options / Description
Customize the features, add custom links, manual trigger buttons and manual output control buttons to the
Live View page
Default Viewer: set your preferred method of viewing moving images.
Add live video from your AXIS 231D/232D Network Dome Camera to your own Web site or save an HTML page
on your local hard disk to display live images from the AXIS 231D/232D.
Settings / Options / Description
Define and save preset positions for quick access to certain camera views.
'Guard Tour' where the AXIS 231D/232D can rotate through the preset positions in a set order or randomly.
Set Pan/Tilt/Zoom and Focus limits to restrict the viewing areas. Set the speed for camera movement
Pan/Tilt/Zoom control queue settings
Settings / Options / Description
General Instructions
Specify destinations for uploaded image files and/or notification messages from the Network Dome Camera.
FTP servers and HTTP servers are intended for saving image files and HTTP servers and TCP servers are intended
for receiving notification messages.
Set the Network Dome Camera to act on Triggered or Scheduled Event Types, e.g. to upload images to a speci-
fied destination when an alarm is activated or at a set time
Shows the status for the inputs and outputs connected to the Network Dome Camera - see Ports & Devices
under System Options.