Port Status - Axis 231D User Manual

AXIS 231D/232D - Event Configuration
24
Scheduled Event
A Scheduled event can be activated at pre-set times, in a repeating pattern on selected
weekdays.
How to set up a scheduled event
This example describes how to set the Network Dome Camera to send an email notification
with saved images from at a set time:
1. Click Add scheduled on the Event types page.
2. Enter a descriptive name for the
event, e.g. Scheduled email.
3. Set the priority (High, Normal or
Low).
4. Set the Activation Time parameters
(24h clock) when the event is to be
active, e.g. start on Fridays at 18.00
with a duration of 62 hours.
5. Set the When Activated...
parameters i.e. set what the Network
Dome Camera is to do at the
specified time e.g. send uploaded
images to an email address.
6. Click OK to save the Event in the Event Types list.
Please use the online help files

Port Status

Under Event Configuration | Port Status there is a list that shows the status for the
connected inputs and outputs of the AXIS 231D/232D for the benefit of the Operator who
cannot access the System Options section.
Example:
If the Normal state for a doorbell push button connected to an input is set to Open circuit - as long as
the button is not pushed, the state is inactive. If the doorbell button is pushed, the state of the input
changes to active.
for descriptions of each available option.