DIRECTV Mobile Receiver/Controller User's Guide
10-4
System Status Lights
Three status lights on the front of the mobile receiver
indicate the current status of the system and can help
you identify problems.
During normal operation, all three status lights
should be lit green. The following tables explain what
the different light conditions indicate.
If multiple receivers are connected, the
ANTENNA light on secondary receivers will
remain off at all times. Only the primary
receiver can monitor antenna status.
Light is...
Off
Green
Green, flashing
Orange
Red, flashing
10.10
VOLTAGE Light Indications
Indicates
Description
Off
Receiver is OFF (power switch is off) or no power input
OK
Good power (between 10-16 VDC at receiver)
Cable Open
Open detected in antenna cable (check antenna coax connection)
Low Power
Low power (between 8-10 VDC at receiver)
Bad Power
Insufficient power (less than 8 VDC or more than 16 VDC input)
System Status Lights
54-0376