KVH Industries DIRECTV User Manual page 106

One Mobile Receiver/Controller and One
Standard-Def Home Receiver
Components Required
• Splitter Kit, KVH P/N 72-0177
• Destacker, Single-output, KVH P/N 19-0347
• The special DC block (40V) splitter included in
the Splitter Kit permits communications between
the antenna and the primary receiver/controller.
A standard off-the-shelf splitter will not work.
Why Do I Need a Destacker?
• The output of the TracVision antenna is a special
stacked signal, which the mobile receiver/
controller is configured to decode. Since all home
receivers are configured to decode unstacked
signals, a destacker is needed to convert the
antenna's stacked signal into an unstacked signal.
54-0376
Compatible DIRECTV Receiver Models
• The TracVision antenna is compatible with all
new DIRECTV-branded, standard-definition
(non-HD) receiver models manufactured today.
Older, non-DIRECTV-branded receiver models
are not supported.
System Wiring Diagrams
A.11