Powering The Handset On Or Off; Registering The Handset - Huawei B686 User Manual

4.2 Powering the Handset On or Off

To power the handset on, press and hold
To power the handset off, press and hold

5 Registering the Handset

Skip this section if your handset is registered with the router.
Register a handset with the router before using it. Otherwise, you cannot
use the handset.
To register a handset:
Press and hold
1.
quickly.
On the handset, select Settings > Handset > Register handset.
2.
Press the up and down navigation keys to scroll to the base with which
3.
you want to register the handset, and then enter the registration
password.
Press the OK key to register the handset with the base.
4.
The default registration password is 0000. To change the

password, select Settings > Base > Security > Change
system PIN.
When registering a handset with the router, ensure that the

handset is near the router. After the handset is registered, use
the handset within range of the router. Otherwise, the handset
will display a message and disconnect from the router.
You can register a maximum of six handsets with the router.

Press

page all handsets that have registered with the router.
To deregister the handset, select Settings > Handset >

Deregister handset. You cannot use the handset after it has
been deregistered.
on the router for over 3 seconds until
on the router. When
10
until the screen lights up.
until the screen turns off.
blinks slowly, you can
blinks