Powering On The Egw1500E - Huawei eSpace EGW1500E Quick Start Manual

eSpace EGW1500E Enterprise Gateway
Quick Start
Figure 2-3 Broadband access

2.4 Powering On the EGW1500E

After cables are connected, press the power button to power on the EGW1500E. View the
power supply indicators and verify that the EGW1500E is working properly. Before pressing
the power button, ensure that all cables are connected correctly to the ports.
Figure 2-4
EGW1500E works properly.
Figure 2-4 Power button
Issue 03 (2011-12-20)
The EGW1500E provides eight LAN interfaces, which can connect to terminals such as computers
and IP phones. To use more than eight LAN interfaces, connect the EGW1500E to an Ethernet
switch or hub.
The EGW1500E provides four POTS interfaces (PHONE1 to PHONE4), which can connect to
common phones or fax machines. To use more than four POTS interfaces, connect the EGW1500E
to an IAD.
shows the location of the power button. If the POWER indicator is on, the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Hardware Installation
7