Security Menu - Epson EB-X24 User Manual

List of Functions
Submenu
IP Settings (This item can only be set if Connection Mode is set to
Advanced.)
You can make network settings.
DHCP: Set to On to make network settings using DHCP
is set to On, you cannot set any more addresses.
IP Address: You can input the IP address
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask: You can input the subnet mask
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address: You can input the IP address for the gateway
for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following Gateway addresses
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
SSID Display To prevent the SSID
screen, set this to Off.
To prevent the IP address
IP Address Dis‐
Standby screen, set this to Off.
play
Function
g
. If this
g
assigned to the
g
for the projector.
g
from being displayed on the LAN Standby
g
from being displayed on the LAN

Security menu

Available when the Wireless LAN unit is installed.
g
Submenu
Select the security type from the items that are displayed.
Security
When setting up Security, follow the instructions from the
administrator of the network system you are about to access.
You can set the encryption for WEP encryption.
WEP Encryption
128Bit: Uses 128 (104) bit encoding.
64Bit: Uses 64 (40) bit encoding.
Format You can set the input method for the WEP encryption key.
ASCII: Input text.
HEX: Input in HEX (hexadecimal).
Key ID Selects the WEP encryption ID key.
83
Function