Adjusting The Volume; Selecting The Projection Quality (Selecting Color Mode) - Epson EB-X24 User Manual

Adjusting Projected Images

Adjusting the Volume

You can adjust the volume using one of the following methods.
• Press the [Volume] button on the control panel or the remote control
to adjust the volume.
[ ] Decreases the volume.
a
[ ] Increases the volume.
b
Using the remote control
(EB-X24/EB-W18/EB-X18/EB-W03/EB-X03/EB-
• Adjust the volume from the Configuration menu.
Settings - Volume p.77
s
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume
before powering off, so that you can power on and then gradually increase the
volume.
Using the control panel
W120/EB-X120/EB-X200 only)
Selecting the Projection Quality (Selecting Color
Mode)
Sets the color mode according to the surroundings. The brightness of the
image varies depending on the mode selected.
Mode
Ideal for use in a bright room. This is the brightest
Dynamic
mode, and reproduces shadow tones well.
Presentation Ideal for making presentations using color materials
in a bright room.
Ideal for watching films in a dark room. Gives
Theatre
images a natural tone.
Photo *1 Ideal for projecting still pictures, such as photos, in
a bright room. The images are vivid and brought
into contrast.
*2 Ideal for watching TV programmes in a bright
Sports
room. The images are vivid and brought to life.
Ideal for images that conform to the sRGB
sRGB
standard.
Even if you are projecting onto a blackboard
Blackboard
(greenboard), this setting gives your images a
natural tint, just like when projecting onto a screen.
Ideal for making presentations using a whiteboard.
Whiteboard
*1 This selection is only available when the input signal is RGB or when the
source is USB Display or USB.
*2 This selection is only available when the input signal is component video, or
when the input source is Video or S-Video.
42
Application
g
color