Advertisement
Error:
yes
Install the GPS antenna properly and
lay the wiring.
Do not calibrate the basic navigation
unit.
yes
Replace defective wiring or fuses.
Do not calibrate the basic navigation
unit.
yes
Install the GPS receiver properly.
Do not calibrate the basic navigation
unit.
No GPS satellite reception for several days
Load the installation disk.
Select „GPS status display".
„No GPS communication available" will appear
on the display.
Connect a test GPS antenna.
Find a clear area and switch the navigation
system on. After approximately 1 minute GPS
communication should be possible.
- 39 -
no
Check the connection wire from the
GPS receiver to the navigation and
the power supply.
no
Replace the GPS receiver.
Wait approximately 1 minute.
no
Replace the basic navigation unit and
do a complete calibration.
Advertisement
