The Head Unit Button Operation For The Setup Or Search List; Radio; Listening To The Radio - Alpine iXA-W404E Owner's Manual

The head unit button operation for the
Setup or Search list
When the unit is doing the Setup setting or searching, operation of
setting or search can also be done using the buttons on the unit besides
touching the soft keys on screen.
1
When a setting or search list is activated, a selection
mark will appear. Rotating the Double Action
encoder can move the selection mark to choose the
item.
Display example for iPod search screen
Selection mark
2
Press /ENTER.
You will enter into detailed setting or selection of this item.
• If there are several operation buttons in the selected item, key
selection mode appears. Refer to "Operating the keys of item" on
page 10.
• Pressing to return to the previous screen.
3
Complete the setting or search by performing steps
1 and 2 repeatedly.
Operating the keys of item
If there are several keys in the selected item, the item will be highlighted
and selection mark will appear on the key.
Display example for AUDIO SETUP screen
Selection mark
The selected item
1
Rotating the Double Action encoder can move
the selection mark to choose the key of the selected
item (e.g. select [ ]).
2
Press /ENTER.
This operation has the same efficiency as touching the
selected key on the screen (e.g. touch [ ]).
• If the selected [ ] or [ ] key is used to adjust the value (e.g. NAV.
Mix Level), pressing and holding
will change the value continuously. The operation has the same
efficiency as touching and holding [ ] or [ ] for at least 2 seconds.
10
-EN
/ENTER for at least 2 seconds

Radio

Display example for FM Radio main screen
1
[DX SEEK]* button: Displays the tuning mode selection
list.
Displays the preset number*
1
* The button displays the current tuning mode.
2
* Displayed only when the current station is the preset one.

Listening to the Radio

1
Press SOURCE to activate mode switching
screen.
2
Slide the display horizontally with your finger to
select Audio/Visual mode.
Each time you scroll the display, the mode switches
circularly in the following order:
Audio/Visual Navigation
Multi Info Audio/Visual
3
Slide the display vertically with your finger, or press
SOURCE repeatedly to select RADIO source.
4
Press /ENTER.
The RADIO source is activated and the display changes to
the RADIO main screen.
5
Touch [BAND] to select the desired radio band.
Each press changes the bands as follows:
FM-1 FM-2 AM
6
Touch [DX SEEK] to choose the tuning mode.
DX SEEK LOCAL SEEK
• There are two modes you can select for auto tuning, DX and Local:
- DX (Distance) mode ;
Both strong and weak stations will be tuned in.
- Local mode ;
Only strong stations will be tuned in.
The initial setting is DX.
• Press / /TUNE/A. ME can also change the tuning mode.
7
Touch [ ], [ ] or [
radio frequency up or down respectively.
In manual mode, touch and hold to change the frequency
continuously.
2
/frequency
Camera Telephone
FM-1
MANUAL
], [ ] to change the