Dish Network Digital PVR User Manual page 7

How to Use the Buttons
AUX M B TV P
ODE UTTON FOR OWER
You can use this button to turn the television on or off without leaving
SAT mode. However, to do this, you must set up the remote to control
the television and not set it up in AUX mode to control another device.
(See page 18 for information on setting up the remote to control other
devices.)
TV/VIDEO B
UTTON
If you connect another signal such as cable or a TV antenna to the
receiver's TV ANTENNA/CABLE IN port on the back panel, you can
use this button to switch the receiver between the satellite signal and
the other signal. If the TV has video format options, use this button to
switch the TV among those options. For example, if the TV supports
High Definition (HD) video, use this button to switch the satellite
receiver between HD mode and Standard Definition (SD) video mode
while using an EchoStar HDTV capable receiver.
VOLUME B
UTTON
Some DISH Network satellite receivers have their own volume control.
For those that do, you can press this button (+) to raise the sound level
or (-) to lower the sound level.
Note: If the remote is programmed to control a TV, pressing this
button to raise or lower the sound volume, will raise or lower the sound
volume of the TV.
MUTE B
UTTON
Some DISH Network receivers have their own Mute control. For those
that do, you can press this button to mute the satellite receiver's sound.
113737 Page 5