Matching Colors To Monitor (Rgb Simulation) - Kyocera Mita FS-8000CD Operation Manual

3.11 Color Control
3.11.2

Matching Colors to Monitor (RGB Simulation)

5
When the desired color mode is displayed, press the ENTER key. Color mode is
changed.
6
To exit the menu selection, press the MENU key.
Computer monitors use three colors of RGB (Red, Green, and Blue) to reproduce all colors. If
you wish to print data using RGB simulation for color reproduction, use the following
procedure. The printer does not use RGB simulation by default but can be set to use sRGB for
simulation.
1
Press the MENU key.
2
Press the or
Color Mode
Color
3
Press the key.
4
Press the or
>RGB Simulation
None
5
Press the ENTER key. A blinking question mark (?) appears.
>RGB Simulation
? None
6
Press the or
7
When the desired RGB simulation mode is displayed, press the ENTER key.
8
To exit the menu selection, press the MENU key.
key repeatedly until Color Mode appears.
>
key repeatedly until >RGB Simulation appears.
key repeatedly until the desired RGB type — sRGB is displayed.
3-98