Table of Contents
Advertisement
Visual Setting
[Visual] is selected on the General setup menu in step 3. Refer to
"General Setup Operation" (page 28).
1
Touch the desired item.
• "Current Source" can be setting while a video is playing.
• "Camera" can be set when "Camera Select" is set to "Rear. "
2
Touch [
] of the desired item.
Setting item: Current Source (Video Media) / Camera
Setting contents: Display Mode* / Brightness / Color / Contrast
* Only "Current Source (Video Media)" can be set.
3
Touch [
] or [
] to change its setting.
4
Touch [
] to return to the previous screen.
• Immediately after changing the settings of Display Setup (While the
system is writing data automatically) do not turn the ignition key to
OFF. Otherwise, the settings may not be changed.
Switching Display Modes
Setting item: Display Mode
Setting contents: FULL (Initial setting) / NORMAL
In FULL mode, the monitor displays a normal picture wider to fit
in a wide-screen monitor.
In NORMAL mode, the monitor displays a normal picture at the
centre of the screen with a vertical black band at each side.
Adjusting Brightness
Setting item: Brightness
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the brightness between MIN (-15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows "MIN" or "MAX" respectively.
Adjusting Colour of Picture
Setting item: Color
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the colour between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows "MIN" or "MAX" respectively.
Adjusting Image Contrast
Setting item: Contrast
Setting content: -15 to +15 (Initial setting: 0)
You can adjust the contrast between LOW (-15) and HIGH (+15).
When it reaches the minimum or maximum point, the display
shows "LOW" or "HIGH" respectively.
31
-EN
Hide quick links:
Advertisement
Table of Contents
