Setting The Brightness Of The Backlighting; Adjusting The Minimum Level Of Backlight; Turn The Function Guide On/Off (Function Guide Fade); Switching The Font Background Color - Alpine IVE-W530 Owner's Manual

Setting the Brightness of the Backlighting

Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: Dimmer
Setting contents: Auto / ON / OFF
Auto: Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
Keep the background illumination of the monitor dark.
ON:
OFF: Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
• When ON or Auto is set, the setting is also applied for the button
lighting in "Adjusting the Dimmer of Button Lighting at Night"
(page 35).

Adjusting the Minimum Level of Backlight

You can adjust the brightness of the backlight (LOW). This function
could be used, for instance, to change the screen brightness while
traveling at night.
Setting item: Screen Dimmer Level
Setting content: -15 to +15
You can adjust the level between MIN (-15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows "MIN" or "MAX" respectively.
Turn the Function Guide ON/OFF
(Function Guide Fade)
By setting to ON, the function guide will be hidden if no operation is
performed for 5 seconds in Radio source, USB source, etc. To display
the function guide, touch the screen slightly.
Setting item: Function Guide Fade
Setting contents: OFF / ON
• In DVD play mode, the function guide will be hidden if there is no
operation for 5 seconds even if you set OFF.
32
-EN

Switching the Font Background Color

You can choose from 4 different colors for the font background.
Setting item: Base Color
Setting contents: Blue / Red / Green / Amber

Adjusting the Touch Panel

Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: Screen Alignment
Setting contents: / Reset
1 Touch the title bar of Screen Alignment.
The adjustment screen appears.
2 Accurately touch the
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the
corner of the screen.
This completes adjustment, and returns to the Display
Setup mode screen.
• If you have touched a location other than the
to restore the adjustment screen to the initial setting.
• If you touch [ ] on the adjustment screen, no adjustment is done
and the Display Setup screen is restored.

Setting the VISUAL Button

Setting item: Visual Key
Setting contents: Navi / V.Sel
Navi: When Navi is set, [
right screen. Touch [
screen directly. (Only when an Alpine optional RGB
Navigation is connected.)
V.Sel: When V.Sel is set, [V.Sel] will appear on the upper right
screen. Recalls the VISUAL selection screen by
touching [V.Sel] on the main source screen.
mark provided in the lower left
mark provided in the upper right
mark, touch [Reset]
] will appear on the upper
] to switch to the navigation