Table of Contents
Advertisement
Radio
Using the system
Switch between wavebands
›
Press the button
for longer.
RADIO
Your radio is equipped with FM and AM wavebands. These are divided in 6 memo-
ry levels, i.e. 3 levels for FM and 3 levels for AM. On each of these levels there are
6 memory slots available.
Activation of the FM waveband
Activate the FM waveband by pressing the
by the FM
selection button. By briefly pressing the
12
switch between the memory levels FM1, FM2 and FM3.
Activation of the AM waveband
Activate the AM waveband by pressing the
by the AM
button. By briefly pressing the
12
tween the memory levels AM1, AM2 and AM3.
Searching for and storing radio stations
Manual search
›
Set the frequency of the desired radio station by turning the settings knob
Store station
›
After selecting the radio station, press the selection button
station should be stored and hold it pressed in until the radio station briefly
switches to mute and a brief signal sounds.
Automatic station finding with storing the radio stations
›
Press the button
. An automatic station finding is started during which the 6
AS
stations with the strongest signal in the memory level FM3 and/or AM3 are stor-
ed.
When the process of storing the radio stations on the selection buttons
plete, you can press any selection button
button for a long time, followed
RADIO
button, you can
RADIO
button for a long time, followed
RADIO
button, you can switch be-
RADIO
, on which the
12
is com-
12
to call up the desired radio station.
12
Note
The stored radio stations of the current waveband are updated and stored once
again in the memory level FM3 and/or AM3 by repeatedly pressing the button
Function SCAN
The stations of a waveband can be played briefly one after the other (for ten sec-
onds).
›
When pressing the settings knob
ble stations of the current waveband.
›
To call up the original radio station, press the selection button CANCEL
›
The automatic station search is terminated by pressing the function button OK
. The current radio station remains selected.
12
›
To choose other radio stations, press the selection button SKIP
RDS Function
Certain radio stations transmit additional text information - designated as radio
text.
›
The information of the radio text is displayed by pressing the button
Note
The text information must not be available to all radio stations.
■
2
Depending upon the quality of the received signal, the radio needs a specific
■
time, in order to correctly read all the illustrated characters.
Traffic information function
Activating/deactivating traffic reports
Press the
button, and TP will be displayed. If a set radio station does not
TP
transmit traffic reports, the radio searches for a station that does.
An incoming traffic report will automatically interrupt CD playback. At the end of
the traffic report, the radio automatically returns to the original play function.
The traffic information function is turned off by pressing the
the TP symbol goes out.
, the radio automatically searches all availa-
2
.
12
button again and
TP
Radio
.
AS
.
12
.
INFO
5
Advertisement
Table of Contents
