Radio Mode - Skoda Beat Manual

Hide thumbs Also See for Beat:
Table of Contents

Advertisement

Range selection
Your car radio is equipped with an FM and
AM receiver. There are 6 pre-sets availa-
ble in each case in the FM bands FM1 and
FM2 and the same in the AM bands AM1
and AM2. The selected range is shown on
the display at position
12
.
When browsing in the AM band, the LW
and MW bands are successively searched
for stations.
Change-over AM - FM:
• A long press on the AM/FM button
switches your radio between the AM
and FM bands. In both bands, the radio
will set itself to the last station listened
to in the respective band.
Change-over FM1 - FM2
(Message displayed
12
• A short press on the AM/FM button
enables you to switch between the FM1
(pre-sets 1 to 6) and FM2 ranges (pre-
sets 7 to 12). In both ranges, the radio
will set itself to the last station listened to
in the respective range.
Change-over AM1 - AM2
(Message displayed
• A short press on the AM/FM button
enables you to switch between the AM1
and AM2 ranges. In both ranges, the
radio will set itself to the last station liste-
ned to in the respective range.
Switching traffic announcements
on / off
(Message displayed
7
• A short press on the TP button
ches you to the TP (Traffic Programme)
band and sets the radio ready to recei-
ve traffic announcements, possibly with
higher speaker volume on or off.. The
display shows a TP symbol
cate that the system is ready to receive.
These messages also break in when the
= FM):
CD is playing. After playing the traffic
7
announcement, the radio returns to the
previous mode. When a traffic announce-
ment breaks in, this is indicated by "INFO
PRGNAME" on the display. If the pro-
gramme set can no longer receive traffic
announcements, this is indicated by "NO
TP" on the display.
The radio now automatically seeks the
next programme with traffic announce-
= AM):
12
ments, which it can receive clearly. The
7
message "TP SEEK" is displayed.
If you do not wish to receive traffic
announcements, press the TP button
to switch off the TP function.
= TP):
11
8
swit-
to indi-
11

Radio mode

GB
8
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents