Table of Contents
Advertisement
CD player
Using the system
Information on how to use a CD
Audio-CDs (CD-A) and MP3-CDs can be played in the internal drive.
Inserting the CD
Insert a CD, with the printed side facing up, into the CD slot
cally drawn in.
The play function will start automatically.
Removing the CD
Press the button
– the CD is ejected.
If the "ejected "CD is not taken out within 10 seconds, it will be retracted again for
safety reasons.
Buttons on the unit for controlling the current audio source
During CD playback briefly press button
lect the previous or next track.
For quick playback of the title press the backward and forward buttons
for longer. The play function is continued after releasing the button.
To scroll through folders or playlists (if they are available on the CD) press the se-
lection button
(applies to MP3 files).
12
Changing between the audio sources
Press the
button to select the audio source: CD (internal CD drive), CDC (ex-
MEDIA
ternal CD changer), AUX/MDI (external input) and BT-AUDIO (wireless transfer of
MP3 data from the telephone preinstallation).
6
CD player
until it is automati-
10
or
turn the settings knob
to se-
2
WARNING
The CD Player is a laser product. On the manufacturing date, this unit was
classified as a class 1 laser product in accordance with the national/interna-
tional standards DIN EN 60825-1: 2008/05 and DHHS Rules 21 CFR,
Subchapter J. The laser used in this class 1 laser product is so weak that there
is no risk of danger when operated correctly. This product is designed such
that the laser is restricted to the inside of the unit. However, the installed la-
ser could be classified in a higher class were the housing to be removed. For
this reason, never remove the housing of the unit.
CAUTION
Never insert CDs with the designation " into the internal drive. Do not insert in
■
drives without a drawer " or use Eco Discs.
After pressing the button
■
CD is ejected. During this time the lock in front of the CD slot is open.
Be sure to wait until the CD has been fully ejected before you try to insert a new
■
CD. Otherwise you can damage the drive inside the unit.
A dirty, mechanically damaged, unreadable or incorrectly inserted CD can cause
■
playback problems. For this reason, the disc may not be playable or may cause the
CD to jump. Check the CD and insert it properly into the unit . Should problems
persist , try using another CD and visit a ŠKODA specialist garage, if necessary.
If the inside temperature of the unit is too high, no CDs will be accepted. The
■
or
unit switches into the last active operating mode.
Never use liquids such as gasoline, paint thinner or record cleaner to clean the
■
surface of the CD - this may cause damage.
Never expose the CD to direct sun light!
■
Only write on the CD with appropriate writing tools.
■
Do not affix anything to the CD!
■
Note
Uneven road surfaces and strong vibrations may cause the CD to jump.
■
In cold weather or after rain showers, moisture (condensate) may deposit in the
■
unit. This can effect the CD jump or impair the play function. In that case, wait un-
til the moisture has dissipated.
Should a CD be dirty, never clean it in a circular motion, but instead work from
■
the inside out. Use a soft, lint-free cloth. For heavy stains, we recommend that
you clean the CD with a commercially available CD cleaner and allow it to dry.
It is possible that CDs protected by copyright and home-made CD-R and CD-RW
■
will not be played back at all or only in certain circumstances.
there is a time delay of a few seconds before the
Advertisement
Table of Contents
