Radio; Using The System - Skoda Radio Blues Owner's Manual

Radio

Using the system

Switch between wavebands
Your radio is equipped with FM and AM wavebands.
In the FM1/FM2 and AM1/AM2 ranges, there are 6 memory spaces available for
each, in order to change, press the
Searching for and storing radio stations
Manual search
›
Set the frequency of the desired radio station by turning the settings knob
Automatic station search
›
The radio searches for the next radio station in the selected waveband by
pressing the button or briefly.
 
Function SCAN
›
Pressing the menu button or the
2
tion key SCN briefly (for 10 seconds) enables the radio channels of current
8
waveband to be played.
›
This function is ended by pressing menu knob
station is played again.
Function AS
›
Press the button and then the AS
MENU
tion finding is started during which the 6 stations with the strongest signal in
the memory level FM1 and/or AM1 are stored.
Store station
›
After selecting the radio station, press the selection button
station should be stored and hold it pressed in until the radio station briefly
switches to mute and a brief signal sounds.
button briefly.
RADIO
button and then pressing the func-
MENU
, which will mean the current
2
function button. An automatic sta-
8
, on which the
8
RDS Function
Certain radio stations transmit additional text information - designated as radio
text.
Note
The text information must not be available to all radio stations.
■
Depending upon the quality of the received signal, the radio needs a specific
■
time, in order to correctly read all the illustrated characters.

Traffic information function
Activating/deactivating traffic reports
Press the button, and TP will be displayed. If a radio station is set which does
TP
not transmit traffic information, NO TP will be shown on the Display and the radio
.
2
will search for a station that broadcasts traffic information. TP SEEK is displayed
on the display.
If no radio station which transmits the traffic reports is found, NO TP is shown on
the display.
An incoming traffic report will automatically interrupt CD playback. INFO and Sta-
tion name is shown on the display. At the end of the traffic report, the radio auto-
matically returns to the original play function.
The traffic information function is turned off by pressing the
the TP symbol goes out.


button again and
TP

5
Radio